omni
tappi

Items per page:
42 Companies with Results for Backing Rings 1 - 10 of 42

Marzolf Company Incorporated

PO Box 281 N8705 COUNTY "W" River Falls, WI 54022-0281 United States of America Tel: 715-426-5705

View company website

... F.A.Q.'s The Marzolf™ two-piece, back-up flanges utilize a half-ring design. The rings slide together, interlocking around the ... to create a rigidity equal to one-piece rings and share common bolt holes, ... uniform seal. These two-piece back-up flanges go on after your pipes are ...

Flexicraft Industries

2315 West Hubbard Street Chicago, IL 60612 United States of America Tel: 312-738-3588

View company website
7 More Results

Flexicraft Ultraspool Double Rubber Expansion Joints

... options include alternative elastomers, filled arches, stainless steel backing rings, or special bolt hole drilling. Control units are ...

Flexicraft Flanged Rubber Pipe

... corrosion, and will accommodate limited amounts of movement. Backing rings are used with the integral rubber flanges. Control ...

Flexicraft Flextra 150 Rubber Expansion Joints

The Flextra 150 spool rubber expansion joint is an excellent value alternative. They are molded and have a wide arch for good movements, and iron retaining ...

Flexicraft 1000HT Spool Rubber Expansion Joint

... Other options include filled arches or stainless steel backing rings. 1000T Spool expansion joints are kept in inventory ...

Flexicraft Rubber Duct Expansion Joints

... are molded with no splices, and incorporate metal backing rings on the flanged connections. They are available in ...

Flexicraft Concentric Reducer Rubber Expansion Joints

... are integral with the body and utilize metal backing rings. Standard flange drilling mates with 125/150# flanges. ...

Fully Molded Duct Expansion Joint

... are molded with no splices, and incorporate metal backing rings on the flanged connections. They are available in ...

close more results

Flexicraft Industries is your one call for every style of metal, rubber, and Teflon expansion ...

Rigid Lifelines

604 Hemlock Road Morgantown, PA 19543 United States of America 610-286-7200

Vincent Corporation

2810 East 5th Avenue Tampa, FL 33605-5638 United States of America Tel: 813-248-2650

View company website
3 More Results

Screen Flush Systems | Vincent Corporation

... to the air cylinder that runs the spray rings back and forth. This is shown in the photo. ... bottom half of the screens. With traveling spray rings we use an air cylinder to run the spray back and forth. These nozzles have a fan spray ...

Peach Cannery | Vincent Corporation

... Fiber Filter was supplied with an automatic spray ring feature. This is used to back-flush the filter sleeves. A booster pump was ...

Dewatering Fresh Cut Waste | Vincent Corporation

... Express, Taylor Farms, and Dole Fresh Vegetable may ring a bell. Typically the waste generated is over ...

close more results

... to the air cylinder that runs the spray rings back and forth. This is shown in the photo. ... bottom half of the screens. With traveling spray rings we use an air cylinder to run the spray back and forth. These nozzles have a fan spray ...

American Roller/ Plasma Coatings

1440 13th Ave Union Grove, WI 53182 United States of America 262-878-7282

JB INDUSTRIES

57 B INDUSTRIAL Berkeley Hgts, NJ 07922 United States of America Tel: 908-665-0404

View company website
4 More Results

33112-33113 Rebuild Instructions - JB Industries, Inc.

... into cup assembly over the boss on the back side of the depressor. 6. Remove barb seal (O-ring) from barb using pointed hook or some other ... install the internal snap ring. Insure the snap ring is seated properly into the ... Back to top PRODUCTS TECHNICAL WARRANTY & REPAIR MARKETING CONTACT ...

FAQ Micron Gauges - JB Industries, Inc.

... a metal-to-metal seat and the O-ring lays around the flare to give it a perfect seal. Back to top 8. Then this means I cannot ...

FAQ Pumps - JB Industries, Inc.

... a metal to metal seat and the O-ring lies around the lip of the flare giving it a positive seal. Back to top 14. Can I mount my micron ...

OTC Warranty - JB Industries, Inc.

... at the base of the case, the O-ring/gasket is chewed up or damaged or missing, there are pliers or channel locks on couplers,and the hook is broken or missing. Back to Top Rothenberger Tools: 24 Months Check for ...

close more results

... into cup assembly over the boss on the back side of the depressor. 6. Remove barb seal (O-ring) from barb using pointed hook or some other ... install the internal snap ring. Insure the snap ring is seated properly into the ... Back to top PRODUCTS TECHNICAL WARRANTY & REPAIR MARKETING CONTACT ...

NSK Americas

4200 Goss Road Ann Arbor, MI 48105 United States of America Tel: 1-800-675-9930

View company website

... row angular contact ball bearings mounted back-to-back except that they have only one inner ring and one outer ring, each having raceways. They ...

Bunting Magnetics Company

500 South Spencer Road Newton, KS 67114-0468 United States of America 316-284-2020

Albany Valve & Fitting Co

120 S Church St Schenectady, NY 12305-2284 United States of America 518-370-3155

Barr Inc

7421 M-50 Onsted, MI 49265 United States of America Tel: 757-428-4032

View company website

Founded by Robert Barr in 1976. Barr was already known for his work on screw ...